Tascam 32 38 pinch wheel roller cap cover (please read)

Widely used in the later Tascam models  really rare now

Be careful here as it seems at some time they used two caps on these machines

This cap slightly overlaps which is not a headache  if you use the reduced height pinch wheels if you try to use the standard ones they will rub and jam at the top, the 38 seemed to stick out a bit further and with extra washers was not an issue.

In some cases over time people have used a different cap in the service centre etc so now they are pretty mixed out there, the standard 1/4 inch tyre will only work with the older flat caps